Liteville 101 Mk1 Trail Factory Machine

Made from bikers for bikers. We build our Liteville Factory Machines exclusively with the best components available – just what we ride ourselves. As to the configuration of the bikes, the focus is on function, reliability, weight and maximum riding pleasure. No matter whether you pursue riding as an amateur or whether you are a World Cup racer, our Liteville Factory Machines are ready to race.


The magazine MountainBIKE has had a closer look at the Liteville 101 Factory Machine in its 2/2016 edition.
Conclusion: "With its 101, Liteville again offers a fascinating and – particularly downhill – capable touring full suspension mountain bike. Even fans of 29 inch wheels will be fully content with the Bavarian brand: both as to the front and rear wheel!“


Frame: Liteville 101 Mk1, 120 mm travel
Surface: Raceblack anodized
Headset: Syntace SuperSpin tapered
Fork: RockShox Pike RCT3
Damper: RockShox Monarch RT3 DebonAir
Drivetrain: Shimano Deore XT 2x11 (crankset: 170/175/180 mm, chainrings: 36x26 teeth)
Brakes: Shimano Deore XT
Brake discs: Shimano Deore XT 203 mm/180 mm
Wheelset Rear/ Front: Syntace W30 MX / W35 MX
Tires Rear/ Front: Schwalbe RacingRalph 2.25 / NobbyNic 2.35
Stem: Syntace F109, 60 /75 / 90 mm
Handlebar: Syntace Vector Carbon High10, 760 mm
Grips: Syntace Screw-On Gripz Moto
Saddle: SQ-Lab Liteville Edition, width: 13 / 14 / 15 cm
Seatpost: RockShox Reverb Stealth 150 mm
Complement: Syntace X-FIX
Optional: SRAM X0 1x11 Drivetrain (additional: EUR 350,–)
Pedals: Syntace NumberNine Titan (additional: EUR 178,–)
Frame lengths: S / M / L / XL

Weight: 12.9 kg without pedals, frame length - M -

Price, including taxes: Euro 5.498,–
Price for kit bike, assembly not included.
The Liteville 101 MK1 Factory Machine will be available from April 2016 through our Liteville distributors.


Syntace Parts

Syntace W30 MX wheelset
Syntace Vector Carbon High10
Syntace F109 stem
Syntace Screw-On Gripz Moto
Syntace SCS chain guide
Syntace X-FIX

Shimano Specification

For our 101 Factory Machine we rely on the proven XT 2 x 11 technique. Rear derailleur, front derailleur, shifters, crankset, cassette, chain and brakes are 100 % Shimano XT. For an additional 350,- Euro, the Factory Machine is also available with a 1 x 11 Sram XO1 drive train.

RockShox Chassis

The RockShox components – the approved Pike fork and the new Monarch DebonAir damper – are the ultimate basis for our Enduro chassis.

Immersible seat post

Up and down. For optimal Trail pleasure the 101 MK1 Trail Factory Machine is supplied with the RockShox Reverb.


The correct frame size influences the performance of the entire bike. Yet it is not only the frame size that is to fit the rider, but also the wheel size. That is why our frames, depending on the frame size and the body height of the rider can be built with different wheel sizes (26”, 27.5” and 29”) and are thus perfectly adapted to the rider’s individual expectations.
Depending on the frame size, these are our wheel size recommendations:
Frame size S:
Rear 26” or 27.5” / Front 27.5”
Frame size M:
Rear 27.5” or 29” / Front 29”
Frame size L:
Rear 27.5” or 29” / Front 29”
Frame size XL:
Rear 27.5” or 29” / Front 29”


Because of the different setup possibilities, there is a large number of different geometry combinations and it is not possible to display these in a traditional geometry table. This is why we have developed a geometry generator which will give you the exact geometry of your preferred setup.
Find the configurator here

Liteville Custom Color

You want your 101 to be painted individually, yet you are not sure about the exact color scheme? This is where the Liteville color configurator comes into play: based upon a Liteville 301 frameset, you may now choose between 100 RAL colors and evaluate, how your choice harmonizes with painted rims or forks. The color configurator is an Adobe Flash Application and is thus not available for Apple iPads and iPhones.

Find the colour configurator here